Productivity:Name SLEEVE ANCHOR WITH HEX BOLT
Size M6 to M20
Material :carbon steel
Surface treat Yzp
SLEEVE ANCHOR WITH HEX BOLT
Short introduction :Preassembled for quick and easy installation, can be used in thin sections of concrete or solid masonry,etc. Head styles for every application. Good quality and competitive price .
Similar products as below :
sleeve anchor with DIN933 hex bolt type
sleeve anchor with hex nut &cone -head bolt type
sleeve anchor with flange nut &cone-head bolt type
sleeve anchor with eye /open hook bolt type
sleeve anchor with eye /open hook bolt type through hot forged
sleeve anchor with DIN7991 bolt type
with plastic ring /without plastic ring
with DIN125 /DIN9021
Size : M6 to M20
We can also provide sleeve anchors as bleow :
sleeve anchor with hex bolt single sleeve type
sleeve anchor with hex bolt double sleeves type
sleeve anchor with open hook bolt type
sleeve anchor with eye hook bolt type
sleeve anchor with pan head bolt type
sleeve anchor with angle washer type
Size : 3/16’’ 1/4’’ 5/16’’ 3/8’’ 1/2’’
Material : Carbon steel ,Stainless steel 200/304/316
Finish :yellow /blue zinc plated . hot treatment
If you have any parts of aimilar manufacturing methods ,please send us the drawings and specifications for our quoatations.
Productivity:Name Sleeve anchor with open,eye hook
Size avaliable in full size from M6X8X45 to M20X25X130
Finish Zinc plated.
selling all kinds of sleeve anchor
material:Carbon steel,stainless steel 202,304,316,
Finish:Zinc plated,Hot dip galvanized,
sleeve anchor with DIN 933 hex bolt type,
sleeve anchor with hex nut & cone-head bolt type,
sleeve anchor with flange nut & cone-head bolt type,
sleeve anchor with open/eye hook bolt,
sleeve anchor with open/eye hook bolt,through hot forged,
sleeve anchor with DIN 7991 bolt type.
with plastic ring / without plastic ring
with DIN 125/DIN 9021 washer
the sleeve anchors supplied for Israel as below:
sleeve anchor with hex bolt,single sleeve type,
sleeve anchor with hex bolt,double sleeves type,
sleeve anchor with open hook bolt type,
sleeve anchor with eye hook bolt type,
sleeve anchor with pan head bolt type,
sleeve anchor with angle washer type,
size: 3/16" 1/4" 5/16" 3/8" 1/2"
carbon steel,then bright zinc plated.
all kinds of 4 pcs heavy duty anchor
4 pcs heavy duty anchor shell only,
4 pcs heavy duty anchor with DIN 933 hex bolt(grade4.8, 6.8, 8.8).
4 pcs heavy duty anchor with projecting bolt (grade 4.8, 6.8, 8.8).
4 pcs heavy duty anchor with eye bolt
4 pcs heavy duty anchor with open hook bolt
4 pcs heavy duty anchor with eye/open hook through hot forged
finish:Yellow zinc plated /phosphating
material:carbon steel,stainless steel 304,316
size:from M6 to M20
nearly all the processes finished by ourselves to keep the prices most competitives
Productivity:Zinc alloy Double expansion/ hammer, easy drive anchor can be used for fastening into rock,concrete,brick,ect.
zinc alloy double expansion Anchor
Can be used for fastening into rock,concrete,brick,etc.
Eliminates high stress points detrimental in fastening into materials of medium hardness,expands fully and has high gripping power.
Ideal for sheer loads or where bolt is subject to side pressure or vibration.
Does not fracture,and permits fastenings at any length.
The test values listed were obtained using 200-252kgs/cm2 concrete (no aggregate).
A safe working load should not exceed 25% of stated value
Zinc Alloy Easy Drive Anchor
Zinc Alloy Easy Drive Ancho
Zinc Alloy Easy Drive Anchor have severol kinds of shapes and sizes, nomatter which shape you interest, please send us email for next negotiation.
Productivity:Nylon hammer drive anchor with wide collar
It’s unique design allows the nail to expand the anchor uniformly in the hole.
Nylon hammer drive anchor with wide collar
The anchor body is manufactured from virgin nylon to withstand high
impact or snock loads. And its great tensile strength makes it unusually
resistant to vibration loads.
The nylon is resistant to chemicals,, fungus ,moisture and other
Electrical and thermal insulating properties are excellent. Thermal resistance ranges from -40°F+170°F.
The pin is made of high strength steel and heavily zinc plated for
maximum corrosion resistance.
Productivity:Name:CE Wedge anchor
Material:304,316 Stainless steel
Size:M6X40-M24X300,1/4X1-3/4 to 1X12
Also produce carbon steel type
CE anchor bolt
A wedge anchor through bolt is a type of fastener used to attach a fixture to a solid base material (such as concrete). The installed end of the anchor has a conical portion around which a metal clip is fastened. When the anchor is set (usually through application of a tension load through torquing a nut) the cone pulls up through the clip and expands the clip against the side walls of the hole. This gives the anchor its resistance to tension.
These are for DIN type,we can also supply you UNC type
Complete nearly all production processes ourselves to keep prices competitive
Productivity:Name Heavy duty anchor 1PCS Draw-in anchor (S type)
Size from M6 to M16
Surface treatment YZP
Material Carbon steel
The Anchor Material
Body : Carbon steel
Planting by Zinc ,ASTMB633
Concrete ,solid bricks ,perforated bricks ,hollow blocks.